§ 220PCS Solder Seal Connectors Kit, Heat Shrink Butt Connectors, Waterproond Insulated Electrical

220PCS Solder Seal Wire Connectors Kit, Heat Shrink Butt Connectors, Waterproond Insulated Electrical Wire Terminals
Support Dropshipping and Wholesag.
100% Original and Good Quality with Free After-sale Warranty.
[Complete 220 Piece Set](40 x white shrink connector AWG: 26-24, 80 x red shrink connector AWG: 22-18, 80 x blue shrink connector AWG: 16-14, 20 x yellow shrink connector AWG: 12-10) Fix frayed wires in no time One kit is all you need for small electrical jobs and big repairs alike.
[Simple as Can Be]Using this solder kit is a cinch. Just heat the wire connectors and shrink tubing with a hot air gun Pros and amateurs alike can do it in a snap. [Color Coded]Never reach for the wrong piece again. The color coding system categorizes each piece by length and diameter, making your job that much easier.
[Designed for Durability]The high quality polymer shrinks quickly, provides eent insulation and is 100% waterproof. Each piece will outlast repeated wear and tear without slipping or tearing. [Endless Possibilities]Shrinking ratio: 2:1,Wire Connector kit is great for a wide variety of electrical repairs. It’s a must for data e protection, automotive, marine and outdoor applications.
Easiest wire connector on the market. solder seal connectors will make your wire connection waterproof just in seconds; also it applies some nical damage protection and prevents wire corrosion
Our connectors are an irreplaceable tool for fast, reliable and effective wire connection in any place and are appreciated by handymen all over the world
Color: red, blue, white, yellow
Material: ABS
HOW TO USE:
Select the proper size connector for the wires, stripped wires.
Insert the stripped wires into the connector.
Apply heat evenly to the connector from the 2 ends first until tubing shrinks and the adhesive ws, then continuously apply heat evenly until solder sleeve melt and seal.
Note:
For best result, please use a hot air gun and rotate the connector to evenly apply heat.
Please raise the temperature from low to high gradually when you use the hot air gun to heat the wire connector.
Please DO NOT set the high temperature at the beginning, or the surface of connector will be over-heated, which will lead to the tube melt while the solder ring still not melt.
Keep the hot air gun at the proper distance. Don’t get too close.
Technical Specifications:
Shrinkage ratio 2:1
Minimum shrink temperature: 80°C
Minimum temperature for solder to melt: 138°C
Operating temperature :-55? – 125?
Waterproof Class: IP 67
Package Includes:
40 x White Connectors: Suits Cable/ Wire Sizes 0.25-0.34mm² (A.W.G:26-24);
80 x Red Connectors: Suits cable/ wire sizes 0.5-1.0mm² (A.W.G:22-18);
80 x Blue Connectors: Suits cable/ wire sizes 1.5-2.5mm² (A.W.G:16-14);
20 x Yellow Connectors: Suits cable/ wire sizes 4.0-6.0mm² (A.W.G:12-10)
1 x PP Storage Case
Only the above package content, other products are not included.
N