AGSHOME ZIGBEE Motion Sensor for Echo Plus Echo Studio & Echo Show 2nd Generation

The DP-ZGMD2 is a Zigbee Wireless Motion Sensor that can be installed indoors to monitor activity. The Motion sensor uses infrared sensors to detect human movements within the sensors range and sends an alert to your phone when motion is detected. The motion sensor works in both light and darkness, but it is not pet immune. The sensor can be used on its own or in a tandem with other compatible devices. This makes it possible to create different automation scenarios in the Smart Life or Alexa and utilize available sensor’s functionalities. Recommended placement is 2-3m above the ground. Detection range is 5m with the sensor angle of 170֯.The sensor transmits motion alerts to your smartphone via Internet. The energy saving Zigbee module allows a transmitting distance of 45m from the wireless router. Low battery status can be monitored through the Smart Life app. MATERIAL: ABS plastic COMPATIBILITY: Tuya/Samotech DP-ZGMD2 Zigbee Gateway Amazon Echo Plus Amazon Echo Show 2 Gen Echo Studio INSTRUCTIONS: DP-ZGMD2 Zigbee Smart Gateway 1. Open Smart Life app and tap the Zigbee Gateway. Tap Add sub-device and select PIR Sensor. Follow on-screen instructions to continue. 2. Ensure your mobile phone is connected to the Wi-Fi network and the sensor is as close to the Zigbee Smart Gateway as possible. 3. Using the reset needle, press and hold the reset button for 5 seconds until the network – pairing indicator starts flashing red on the sensor. Follow the on-screen instructions on your phone to finalize the setup 4. The sensor should now be ready and operational. Amazon Echo Plus / Echo Show 2nd Gen 1. Using the reset needle, press and hold the reset button for 5 seconds until the indicator starts flashing red on the sensor 2. Ask Alexa to “Discover new devices” PACKAGE CONTAINS: DP-ZGMD2 Zigbee Wireless Motion Sensor 3M adhesive sticker & Instructions