LATNEX RF-SG6 RF Explorer Signal Generator Combo High Frequency HF FM Modulation Radio Frequency Oscillator Source CW Sweep Tracking Generator 6GHZ (100KHz – 6000MHz)

The LATNEX Signal Generator Combo is a powerful, wideband fully programmable RF signal generator with harmonic filtering, high-performance amplifiers for higher output power, fine amplitude adjustment and support for frequencies as low as 100KHz covering up to 6GHz with no gaps. Generates CW signal at any frequency in the range.
Tracking generator functionality working together with RF Explorer when connected to the same PC Sweep generator between any to frequencies in the range, with selectable step size and speed. 
Features 
✔Wideband support, very stable CW signal output
✔Fine amplitude adjustment 0.25dB
✔High output power up to +18dBm
✔Optional recalibration procedure available upon request
Specification

Frequency range supported: 100KHz to 6000 MHz
Calibrated Amplitude range: -40 to +10dBm
Uncalibrated extended Amplitude range: -60 to +18dBm
Amplitude step/resolution: 0.25dB over calibrated range
Amplitude accuracy (typical): +/-2dB in most frequency and power ranges
Frequency step/resolution: 1KHz
Frequency stability: 0.5ppm
Temperature compensated (0-45C)
Backlight for great indoor visibility and high contrast LCD for outdoor visibility
Standard SMA 50 ohms connector
Spurs: Internal fractional PLL configuration in some cases create spurs typically -50dBc or less.
Harmonics: typical values range about -40dBc for 2nd harmonic, -50dBc for third and higher harmonics.
Switch measurement point speed < 10ms CW signal generator at any frequency in the range  Tracking generator functionality working together with RF Explorer Spectrum Analyzer when connected to the same PC  Sweep generator between any to frequencies in the range, with selectable step size and speed