Motor Wireless Remote Switch 12V Universal 2 Channel RF Remote Control, 433Mhz Remote Receiver Switch 9V – 12V DC Motor Controller 2 Transmitter with 1 Receiver

Working voltage: DC 9V to 12VMaximum load current: less than 10ASize:3.96in*1.77in*1.14inFunction:Limit & Wire External Button Original State OFF,(Suddenly, the electricity was cut off, then comes again,the State still is OFF, you need manual turn it ON)Out State:Momentary Latched Adjusted by the Jumper on the Receiver,(we ship default as Latched, if you need use Momentary to change the Jumper on the Receiver)Momentary–Jumper on “1&2″ PinLatched–Jumper on “2&3”PinMomentary–Press button”Up”, the Motor Forward, Release is Stop. Press Button “Down”, the Motor Reverse,Release is Stop.Latched–Press button “Up”, the Motor Forward,Press Button “Stop” is stop.Press Button “Down”,the Motor Reverse, Press Button “Stop” is stopWhen the receiver output state is “Latched”, we have set it 0.5s time delay for forwards and reverse, it is the Protection function. We have made transmitter and receiver working together and test it before ship it,when you get it don’t need to do anything ,just install it.Learning Code1.Press the learning button on the receiver for 1 time,the learning indicator ON,Then press the transmitter button up for 1 time (first button default for forward) ,the learning indicator flash 3 times and ON,It mean the first button learning Successfully2.Then press the transmitter button down for 1 time (second button default for reverse) ,the learning indicator flash 3 times and ON,It mean the second button learning Successfully3.Then press the transmitter button stop for 1 time (third button default for stop) ,the learning indicator flash 3 times and ON,It mean the third button learning SuccessfullyPress the learning button on the receiver for 5s,the learning Successfully4.Then press the transmitter button stop for 1 time again,the learning indicator flash 3 times and OFF,It mean all button learning Successfully Package: 1pcs Receiver + 2pcs Transmitter