Pcbfun Esp32 Development Board Module High Precision Test Burn Fixture For Esp-wroom-32 Minimum System

Features:
1.This fixture does not include the ESP8266 module, and this board is suitable for fixed burning testing of modules such as Anxinke ESP-12S/2F/12E/O7S/07.
2.All IO ports have been brought out and can be used as the minimum system development board or for small batch firing
3.The fixture board supports firmware one click download function
4.And added a burning mode indicator light (blue light) and a serial communication indicator light (green light).
5.Download the corresponding CP2104 serial port chip driver according to the operating system and install it
Parameter:
1.Download the corresponding CP2104 serial port chip driver according to the operating system and install it.
2.Download the FLash download tool ESPFLashDownloadTool
3.Automatic download fixation: Press in the module, turn on the power switch, and use the FLash download tool to configure the desired burning parameters. Click on START download to start firmware burning. The downloader will automatically reset and put the module into the burning mode.
4.Manual firmware download: Press in the module, turn on the power switch, open the burning software, configure the corresponding burning parameters, long press the burning button, then short press the reset button, and then click START download to start burning the firmware.
5.The downloader is suitable for modules such as ESP-12S/ESP-12F/ESP-12E/ESP-O7/ESP-07S. When the burning button is pressed, the blue burning indicator light will light up and the IO0 pin of the ESP8266 module will be pulled down. Please refer to the relevant documentation on how the module enters the burning mode.
6.Product size: 49mm * 46mm
Package include:
1X expansion board