QIACHIP 433MHz Universal Wireless RF Remote Control Switch DC 6V 12V 24V 1CH Channel Relay Wireless Secure RF Remote Control Switches Transmitter and Receiver kit, Momentary Toggle Latched Mode

Specification:

Working voltage: DC 3.6V~24V

Maximum load: 2A

Static current: 3.6 mA ~ 5.5mA

Working frequency: 433MHz

Reception sensitivity: ≥ -107dBm

Output DC3.6V~DC24V

Size: 22.5 mm x 11mm x 8mm (length × width × high)

Mini size support coding format 1527 learning code

Input: DC3.6V~DC24V

Output: DC3.6V~DC24V

Modulation mode:ASK (superheterodyne)

Number of stored remote controls: ≤ 10

Working mode: Momentary, Toggle, Latching Mode

Learning style: Learning Button

Steps:

Clear Code: Press the learning button on the module 8 times continuously, and the light flashes seven times and then goes out.

Momentary Mode：Press Module learning button 1 time, the indicator light is always on, then press the remote control button, the indicator light flashes 3 times and then turns off , then the learning is successful; If the code is not successful , the indicator lights out of the learning state after 15 seconds .

Toggle Mode  ：  Press the Module Learning button 2 times, the indicator light always turns on; then press the remote control button, the indicator lights flicker three times and then off, then the learning is successful; if the code has not been successful, the indicator lamp goes out of the study state after 15 seconds.

Latching Mode：Press the Module Learning button 3 times, the indicator light always turns on; and then press the buttons on the remote control , the indicator lights flicker three times and then off,then the learning is successful; if the code has not been successful, the indicator lamp goes out of the study state after 15 seconds.