Rupse Upgraded Universal HUD Car Heads Up Display Dual System OBD2/GPS，A Pillar Dashboard Install Vehicle Speedometer Engine RPM OverSpeed Warning

Note: 1.Not suitable for diesel cars, electric cars, hybrid cars, pickup trucks 2.If set speed unit to MPH, the water temperature unit will automatically be ℉, driving distance unit will automatically be Mile, fuel conusmption unit will automatically be MPG. 3.If set speed unit to KM/H, the water temperature unit will automatically be ℃, driving distance unit will automatically be KM, fuel conusmption unit will automatically be L/100 KM No display: (1) Start the engine. Verify the Smart Gauge is switched on. Verify the OBD connecting cable is correctly and firmly connected. (2) If the problem continues, test the Smart Gauge in a different vehicle. (3) If the car donnot have OBD2 protocol, long press [ M ] button for 5 seconds, find [System Set – OBD Switch], make OBD Switch [ OFF ], it means switch to GPS mode. Inaccurate speed: Long press [ M ] button for 5 seconds,find [Speed Set – Speed Adjust], if Smart Gauge show faster 2 km/h than dashboard, adjust the parameter to -2, if Smart Gauge show slower 2 km/h than dashboard, adjust the parameter to 2. Inaccurate clock: Long press [ M ] button for 5 seconds, find [Clock Set – Clock Adjust ],then can adjust the hour and minutes. How to rotate the screen: Press and hold the [M] key for 5 seconds to enter the setting mode, press the [<] or [>] key, find [System Settings-Screen Vertical], and set the appropriate angle Package: 1* HUD 1* OBD Cable 1* Tying 2* Sticking tablets 1* Rocker 1* Manual