Sourcingpower RC Battery Charger for 3.6V,4.8V,6V,7.2V,8.4V,9.6V NiMH/NiCd Battery Packs Hobbies Airsoft Batteries,RC Car,Truck,Airplanes,Air Gun,with Tamiya,Hitec,RX,JST,T Plug

Make sure this is what you want.

Not applicable: LiPO, LIPO, Li-Po, LI-PO, Li-Polymer, Li-Poly, Lithium Polymer, Li-ion, Lithium-Ion, Lithium
Advantage

Auto-stop battery charger.After fully charged, the power is automatically cut off to ensure the safety of charging meanwhile protect the battery life;
Trickle chargeIn a fully charged state, after automatic power off, the charger will maintain a trickle charge state to ensure that the battery is always fully charged when the battery has not been removed for a long time.
Easy operation

Red light = charging         
Green light = charged

RC Battery Charger for NiMH/NiCd Battery Packs（3.6v, 4.8v, 6v, 7.2v, 8.4v, 9.6v)

Connect the charger to mains(110V-240V AC~ 50/60Hz);
The LED light will flash briefly to indicate that it is ready;
Please check the polarity before connecting the batteries;
Connect the RC battery (NiMH or NiCd), the LED light will light up red during the charging process;
When done charging, the LED light will switch to green;
Until the battery is disconnected the charger will keep the battery completely charged.

Technical Data:

Input Voltage: 110-240V—50-60Hz.
Power Comsumption: Approx. 12W.
Charge Rate: Max 1000mA.
Charge Indication: red/ green LED light.
Operating Temperature: -10℃/14℉ to 40℃/104℉.
Dimensions: Approx. 80 x 50 x 67 ex. Cable

Only one connector can be used at a time when in use, please do not use two heads to charge at the same time